Welcome • User Guide
ToS • Privacy • Canary
Donate • Bugs • License

©2025 Poal.co

846

Once again, it's time for the FNGT!

If you don't know how this works, . That link will take you to another site to give you some additional information and tell you about some of our off-site features. That's also the site where we will host the weekly guitar threads, should Poal go down.

NOTE: That site is by invitation only. If you want an invite, and you're a regular participant, then just ask theBuddha, or myself.

If you do know what's going on, you probably don't need to click that link - but you may want to, to make sure you know of the other features, such as the archive or a separate forum that's invite only.

Remember, we are guests here on Poal. Let's act like it. If you're interested in supporting Poal, then .

**Once again, it's time for the FNGT!** If you don't know how this works, [click this link](https://fngt.gq/index.php?page=intro). That link will take you to another site to give you some additional information and tell you about some of our off-site features. That's also the site where we will host the weekly guitar threads, should Poal go down. **NOTE:** That site is by invitation only. If you want an invite, and you're a regular participant, then just ask theBuddha, or myself. If you do know what's going on, you probably don't need to click that link - but you may want to, to make sure you know of the other features, such as the archive or a separate forum that's invite only. Remember, we are guests here on Poal. Let's act like it. If you're interested in supporting Poal, then [you can donate](https://poal.co/donate).

(post is archived)

You are currently inside a comment thread.
Click here to see all the comments (338).
[–] • 0 pt

I should lower the bridge some more and see how it responds. I did not cut the grooved in the nut down any more than what was there from production either

[–] • 0 pt

To measure for the nut, put a capo on the third fret (some use the 2nd) and tap the strings. There should be (your favorite amount of) space - or, more generically, about enough to hold a thin pick or credit card between the fret itself and the string.

[–] • 0 pt

Could you test that by putting a capo on the third fret and see if they ring?

[–] • 0 pt

You put the capo on the 3rd fret and then tap on the 1st fret. There should be a minute amount of space between the string and the top of the fret. You can hear it make a tapping noise, if it's quiet. Once you're used to it, you can just feel it.

So, you're basically using the capo in reverse. You're concerned with what's between the nut and capo, not the capo and the bridge.