Welcome • User Guide
ToS • Privacy • Canary
Donate • Bugs • License

©2025 Poal.co

1.4K

Once again, it's time for the FNGT!

If you don't know how this works, . That link will take you to another site to give you some additional information and tell you about some of our off-site features. That's also the site where we will host the weekly guitar threads, should Poal go down.

NOTE: That site is by invitation only. If you want an invite, and you're a regular participant, then just ask Crazy, or myself.

If you do know what's going on, you probably don't need to click that link - but you may want to, to make sure you know of the other features, such as the archive or a separate forum that's invite only.

Remember, we are guests here on Poal. Let's act like it. If you're interested in supporting Poal, then .

**Once again, it's time for the FNGT!** If you don't know how this works, [click this link](https://fngt.gq/index.php?page=intro). That link will take you to another site to give you some additional information and tell you about some of our off-site features. That's also the site where we will host the weekly guitar threads, should Poal go down. **NOTE:** That site is by invitation only. If you want an invite, and you're a regular participant, then just ask Crazy, or myself. If you do know what's going on, you probably don't need to click that link - but you may want to, to make sure you know of the other features, such as the archive or a separate forum that's invite only. Remember, we are guests here on Poal. Let's act like it. If you're interested in supporting Poal, then [you can donate](https://poal.co/donate).

(post is archived)

You are currently inside a comment thread.
Click here to see all the comments (235).
[–] • 0 pt

That is probably good thinking

[–] • 0 pt

I do kinda want to see if they can get my M6 into a parking spot, turn it off, and then get it back to me. The M6 isn't even that complicated. Give 'em something like a modern Lambo and they might not even be able to find the start button. A McLaren would just frighten them.

[–] • 0 pt

I wouldn't really even want to touch a car like that when I did not own it and do not know the owner

[–] • 0 pt

LOL The M6, for example, doesn't need a key - you just need the fob and you push a start button. That's pretty easy and it always starts in neutral. The parking brake is automatically set, so you need to undo that. Then, you have to figure out how to put it in gear. Then you've gotta be REALLY careful with the gas pedal 'cause it will surprise you. It doesn't take all that long for you to get up to speeds that'll result in bodily injury.

I'm watching NASCAR for no good reason. I just like cars going around and around. I'm not a NASCAR fan, I just happened to notice they were on when I switched to Fox to see if they were doing anything interesting.

[–] • 0 pt

my son and one of his friends are working on his friends car out in my driveway and they have a bolt that holds the control arm and connects to this frame and subframe junction. they took a grinder and grinded the bolt off that was holding the control arm at the frame and grinded the nit off of the bottom of the bolt under the frame. There is a piece of the bolt that is not threaded stuck in the frame. they have an aceteline torch that they have never used, can they just heat the fuck out of the bolt peice and melt it out?

[–] • 0 pt

Not if it's threaded and no oxy/acetylene doesn't get hot enough to really melt metal.

And, if they melt the bolt they'd melt the metal around it.

Heat it and beat it, assuming it's threaded. If it's not threaded, heat it and punch it. If it's threaded, you're trying to get it to come out a few threads so that you can get something to grip on it. If it's not threaded, you're heating it and then using something to punch it out.

It sounds like they've made some bad decisions.

If it's threaded, there are tools that will help you get it out like it was a stripped nut. But, this might need to be drilled out. You can often drill a smaller hole - just a little smaller, and then make the bolt collapse into the space you drilled out. If it's not drilled, the same thing applies but you can just drill it out and not have to worry about the threads.

Make sense?