Welcome • User Guide
ToS • Privacy • Canary
Donate • Bugs • License

©2025 Poal.co

1.2K

Once again, it's time for the FNGT!

If you don't know how this works, . That link will take you to another site to give you some additional information and tell you about some of our off-site features. That's also the site where we will host the weekly guitar threads, should Poal go down.

NOTE: That site is by invitation only. If you want an invite, and you're a regular participant, then just ask Crazy, or myself.

If you do know what's going on, you probably don't need to click that link - but you may want to, to make sure you know of the other features, such as the archive or a separate forum that's invite only.

Remember, we are guests here on Poal. Let's act like it. If you're interested in supporting Poal, then .

**Once again, it's time for the FNGT!** If you don't know how this works, [click this link](https://fngt.gq/index.php?page=intro). That link will take you to another site to give you some additional information and tell you about some of our off-site features. That's also the site where we will host the weekly guitar threads, should Poal go down. **NOTE:** That site is by invitation only. If you want an invite, and you're a regular participant, then just ask Crazy, or myself. If you do know what's going on, you probably don't need to click that link - but you may want to, to make sure you know of the other features, such as the archive or a separate forum that's invite only. Remember, we are guests here on Poal. Let's act like it. If you're interested in supporting Poal, then [you can donate](https://poal.co/donate).

(post is archived)

You are currently inside a comment thread.
Click here to see all the comments (235).
[–] • 0 pt

he said he might be able to drill a small hole all the way through the center

[–] • 0 pt

Start with that and then use bigger and bigger drill bits. Then, you can cut the bolt or just smash the sidewalls of the bolt, collapsing it into the middle. (I think I gave more details in an earlier post.)

That's your only realistic option at this point. Try for the bolt's center as much as you can. Drill it through and then just use bigger bits. At some point, it may actually just pull out, but that's what I'd try next - under good lighting.

Use penetrating/cutting oil if you've got it.

[–] • 0 pt

wouldnt you think a hole would let the whole thing get hotter? then the hammering it might break it loose before drilling and drilling again

[–] • 0 pt

If the hole was large enough, yes. A small 1/8" hole ain't gonna let much heat into it, nor add that much surface area.

[–] • 0 pt

wouldnt you think a hole would let the whole thing get hotter? then the hammering it might break it loose before drilling and drilling again